What are the (best) practices for land-use mapping adapted to the Belgian landscape?
OpenStreetMap (OSM) is not just a map but rather a big geodatabase with a free tagging model for classification of geographical features. It can be used for land-use mapping, as described in the dedicated wiki page here. For instance, the recent project OSM-Landuse specifically aims at producing land-use maps from OSM data.
Because of its free tagging scheme and its incredible generalist model (OSM is a map of … everything), do not expect a clear classification scheme of land-use/land-cover as in other land-use maps (such as in Corine Land Cover or GlobCover)! A note about the tagging system in OSM: each geographical features (e.g., a house, a road, a city or a forest) is characterised by a couple of key – value words, that forms a tag. For instance, a residential road inside an urban area is tagged as “highway=residential”, where “highway” is the key, i.e., a kind of category that spans from small paths to motorways, and “residential“ is the value of the key. The dedicated tag for mapping land-use in OSM is “landuse=*” but other tags (notably: natural=*) can also be used.
A difficulty in land-use mapping and classification is the definition of common classes that encompasses various landscapes and ecoregions. As a global project, OSM uses tags for mapping land-use worldwide. Therefore, it is important to specify how to use these tags for land-use mapping in a specific ecoregion/country. The purpose of this article is to discuss the best practices in land-use mapping in Belgium with OSM.
The dedicated tag for forests is landuse=forest. Then, more information about the forest can be added using leaf_cycle=* & leaf_type=*. In Belgium, one can encountered:
- Broadleaved deciduous forests, tagged as forest=landuse; leaf_cycle=deciduous, leaf_type=broadleaved, mainly formed by beeches, oaks, populus, maples, birches, …
- Needle-leaved evergreen (coniferous) forests, tagged as forest=landuse; leaf_cycle=evergreen, leaf_type=needleleaved, mainly formed by fir trees, Douglas, and pines.
- Needle-leaved deciduous forests, tagged as forest=landuse; leaf_cycle=deciduous, leaf_type=needleleaved, much more less common than the first two types, formed by larch trees (Larix sp.)
Further notes about forests:
- IMHO, there are no broadleaved evergreen forests in Belgium, even though some trees are broadleaved evergreen (think about holly trees – Ilex Aquifolium), they do not form large chunks of forests in Belgium.
- We can also use the tags leaf_cycle=mixed and leaf_type=mixed for mixed forests types. These tags are actually very common in Belgium and used to describe large forests where some parcels are needleleaved-evergreen and other parcels broadleaved-deciduous. In a ideal (OSM) world, we should map separately parcels according to their leaf cycle and leaf type, since “real” mixed forest are not so common in Belgium.
- No matter the size of the forest, in OSM you can use the above-mentioned combinations of tags for mapping small, isolated patches of forest formed by a dozen of trees up to large forested areas.
- We can also use the tag taxon=* to further specify the tree species that are grown in the forest. This can be used not only for monospecific forests (taxon=fir trees) but also for multi-species landscapes: in this case, separate the species names by commas (taxon = oak, beech, ash ).
- The tag wood=* is deprecated and should be replaced by leaf_cycle=* & leaf_type=*.
- The tag natural=wood is sometimes used for forests, but since natural=wood would refers to unmanaged, natural forests, IMHO it should not be used in Belgium since no more forests are completely natural: every patches of forest in Belgium has experienced human interventions in the recent history.
There is no clear consensus about which tags we should use to map agricultural lands in Belgium. Actually, it’s a recent discussion on the Belgian talk mailing list about mapping farmlands that gave me the idea of writing this article.
Agricultural lands are occupied by annual or perennial crops (croplands), or by meadows (grasslands). Meadows can be hay meadows (cut 1, 2, or several times a year for hay producing) or grazed meadows with animals.
- Croplands are usually tagged as landuse=farmland
- The tag crop=* could be used to specify which crop is sowed. But it is likely that it will change every year in Belgium!
- A lot of deprecated landuse=farm features still exist in Belgium, they should be changed either to landuse=farmyard or landuse=farmland.
Meadows also fall under the definition of landuse=farmland. Grazed meadows could be tagged as landuse=farmland + animal=yes and hay meadows using landuse=farmland + crop=grass.
However, there also exists the landuse=meadow tag for specifically mapping meadows. The OSM wiki is not clear about which tag use, here’s an excerpt of the wiki page of landuse=farmland: “Also note that many mappers prefer the more specific tags landuse=meadow for meadows and pastures (…), landuse=orchard for fruit orchards, and use landuse=farmland for cropland only.” Some mappers consider that meadows can be easily ploughed and becomes croplands and so map grasslands using the generic tag landuse=farmland.
However many mappers prefers to use the landuse=meadow over the landuse=farmland. Some Belgian meadows can be considered as permanent (> 10 years according to FAO definition). This is particularly true in Ardennes, Pays de Herve where some meadows are probably several decades old. In addition, some meadows could not easily be ploughed because of the presence of stones, trees or because they are too wet.
Note also the meadow=agricultural tag to specify that the meadow is used for agricultural purpose.
I would propose the following tagging for agricultural grasslands in Belgium:
- meadows: landuse=meadow + meadow=agricultural
And if you know more about the way it is managed:
- hay meadows: landuse=meadow + meadow=agricultural + crop=grass
- grazed meadows: landuse=meadow + meadow=agricultural + animal=yes
More thought about agricultural lands
The issue is that agricultural land affectation often change from one year to another! Most croplands do actually change of crops every year because of the agricultural benefits to make such crop rotations. Furthermore, most croplands are also covered by intermediate cover crops between two crops, since it is imposed by agro-environmental regulations. And sometimes, agricultural lands do change from croplands to meadows and vice-versa.
- Farms buildings and around should be tagged as landuse=farmyard.
- Orchards, a kind of perennial crop, should be tagged as landuse=orchard. They are particularly common in some places of Belgium (Sint-Truidden, Gembloux)
- Hedges around fields can be mapped as barrier=hedge, fences as barrier=fence.
Other vegetated lands
Compared to wilder countries, Belgium is a very intensively managed country, with a few lands that is really made of spontaneous vegetation. Anyway, we can encounter some lands that are not forest or agricultural lands: marsh, wetlands, shrubs… For these lands, you can consider the following tags:
- natural=wetland + wetland=bog, as it is mapped in the Hautes Fagnes, which refers to a wetland with peat accumulation.
Note that often, on aerial imagery, some lands appears as scrub while there are actually forest lands in a process of regeneration after a clear cut. So should we mapped them as landuse=forest or natural=scrub? To me it depends on the case. If I make a ground survey and see newly planted trees or fast regenerating trees, then I’d map it as a forest.
I won’t cover the tagging of urban areas in this article. Yet, many other landuse values apply to residential, industrial, commercial areas, but also the leisure=*, amenity=* and tourism=* keys. See the landuse page for further information.
About land-use geometries & way-of-mapping
- How to draw land-use polygons in Belgium? Usually, large forested areas are mapped as one large polygon, which often has to be a multipolygon (a polygon with holes, or more complex polygons). Some large portions of agricultural lands in Belgium are represented as multipolygons, but more often, they are represented as small patches of lands, as they actually appear in reality, corresponding to a single management unit. I do prefer this way of tagging over the large multipolygon approach, because it allows to quickly change attributes of farmland in the future, when, e.g., a meadow is changed to a cropland.
- There are some discussions about the way to connect a land-use polygon to the other elements of the map. Should the land-use polygon be stuck to nearby roads (or track, or river) or should we separate the land-use polygon from the road by a small space? I prefer the last option, as there is often something between a road and an agricultural land: a fence, a hedge, a ditch that can also be mapped as a separate way in OSM.
Conclusion: land-use mapping in Belgium (with OSM)
There is actually still a lot of land-use elements to map in Belgium, especially in Wallonia. In other well-mapped areas, land-use would need a serious “refresh”, since land can change of affectation from time to time. Pure mapping applications benefit from the land-use information from OSM, for instance the maps of OpenTopoMap. With a larger completness, OSM could be also increasingly used in environmental research and operational applications, such land-use change monitoring, in relation with vegetation and climate modelling. Land-use/land-cover is a hot topic in environmental research and the deployment of new generations of earth observation satellite such as Sentinel 2 offers increasing opportunities for land-use mapping. Nevertheless, automatic classification of satellite imagery still needs on-ground validation and usually could not compete with grounded, crowdsourced information from a dense and active local community. Combining crowdsourced land-use information from OSM with satellite imagery classification is certainly the way to go.
PS: An interesting discussion followed this blog post at the Belgian OSM mailing list: here are the e-mails. I’d to summarize this discussion whenever I’ll have some time.
Photos credits (Flickr): Marc Dufrene (cropland), kaskitewatim (picea abies forest), helenetchandjiabo (grazed meadow), rire&vivre (Fagus sylvatica trees), peupleloup (Larix trees), bushman_k (Hautes Fagnes)